OBT250-R103-2EP-IO-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  25 ... 250 mm
• Repetition rate
  approx. 13 kHz
• Operating voltage
  10 ... 30 V DC
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Wave length
  680 nm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  0x110705 (1115909)
• Switching frequency
  1650 Hz
• Reference target
  standard white, 100 mm x 100 mm
• Pulse length
  3 µs
• Ripple
  max. 10 %
• Min. cycle time
  2.3 ms
• Response time
  300 µs
• Housing depth
  26.7 mm
• Light type
  modulated visible red light
• Diameter of the light spot
  approx. 1 mm at a distance of 200 mm
• Mission Time (TM)
  20 a
• SIO mode support
  yes
Voltage drop
≤ 1.5 V DC
Connection
2 m fixed cable
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
MTTFd
560 a
Interface type
IO-Link ( via C/Q = BK )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing height
36.5 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Ambient light limit
EN 60947-5-2 40000 Lux
Protection class
III
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Detection range
7 ... 250 mm
Laser class
1
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Detection range min.
7 ... 25 mm
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
2 m
Light source
laser diode
Opening angle
approx. 0.3 °
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
IO-Link revision
1.1
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Detection range max.
7 ... 250 mm
Black-white difference (6 %/90 %)
< 5 % at 120 mm
No-load supply current
< 20 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
Laser safety
EN 60825-1:2014
Optical face
PMMA
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Mass
approx. 35 g

OBT250-R103-2EP-IO-1T-L Related Documents