OBT250-R103-2EP-IO-1T-L-Y0329 Pepperl + Fuchs Electronic Components

Product Details

• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• max. pulse energy
  10.4 nJ
• Device profile
  Smart Sensor
• SIO mode support
  yes
• Response time
  300 µs
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Light source
  laser diode
• Diagnostic Coverage (DC)
  0 %
• Usage category
  DC-12 and DC-13
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Optical face
  PMMA
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2 40000 Lux
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Control elements
  Light-on/dark-on changeover switch
• Switching frequency
  1650 Hz
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing width
  15 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Diameter of the light spot
  approx. 1 mm at a distance of 200 mm
Device ID
0x110705 (1115909)
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
Communication interface
IEC 61131-9
Housing depth
26.7 mm
Adjustment range
25 ... 250 mm
Wave length
680 nm
Opening angle
approx. 0.3 °
IO-Link revision
1.1
Compatible master port type
A
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K
Reference target
standard white, 100 mm x 100 mm
Pulse length
3 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Housing height
36.5 mm
Laser class
1
Repetition rate
approx. 13 kHz
Operating voltage
10 ... 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 17 g
Detection range min.
7 ... 25 mm
Mission Time (TM)
20 a
Ripple
max. 10 %
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Laser safety
IEC 60825-1:2007
Housing
PC (Polycarbonate)
Detection range
7 ... 250 mm
MTTFd
560 a
No-load supply current
< 20 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Cable length
0.3 m
Detection range max.
7 ... 250 mm
Black-white difference (6 %/90 %)
< 5 % at 120 mm
Protection class
III
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin

OBT250-R103-2EP-IO-1T-L-Y0329 Related Documents