OBT250-R103-2EP-IO-0,3M-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  7 ... 250 mm
• Diameter of the light spot
  approx. 1 mm at a distance of 200 mm
• IO-Link revision
  1.1
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• EAC conformity
  TR CU 020/2011
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• Laser class
  1
• Wave length
  680 nm
• Mission Time (TM)
  20 a
• Device ID
  0x110605 (1115653)
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• MTTFd
  560 a
• Detection range
  7 ... 250 mm
• Pulse length
  3 µs
• Ambient light limit
  EN 60947-5-2 40000 Lux
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Ripple
  max. 10 %
• Min. cycle time
  2.3 ms
• Compatible master port type
  A
• Switching frequency
  1650 Hz
Laser safety
EN 60825-1:2014
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Degree of protection
IP67 / IP69 / IP69K
Detection range min.
7 ... 25 mm
Opening angle
approx. 0.3 °
Operating voltage
10 ... 30 V DC
No-load supply current
< 20 mA at 24 V supply voltage
Device profile
Smart Sensor
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Voltage drop
≤ 1.5 V DC
Product standard
EN 60947-5-2
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Adjustment range
25 ... 250 mm
Black-white difference (6 %/90 %)
< 5 % at 120 mm
Protection class
III
Interface type
IO-Link ( via C/Q = pin 4 )
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Communication interface
IEC 61131-9
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing depth
26.7 mm
Mass
approx. 17 g
Light type
modulated visible red light
Repetition rate
approx. 13 kHz
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing height
36.5 mm
Optical face
PMMA
Cable length
0.3 m
Reference target
standard white, 100 mm x 100 mm
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Response time
300 µs
Housing width
15 mm
Light source
laser diode
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Diagnostic Coverage (DC)
0 %

OBT250-R103-2EP-IO-0,3M-V31-L Related Documents