OBE500-R3F-SE2-0,2M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Receiver
  OBE500-R3F-E2-0,2M-V31
• Function indicator
  Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
• Switching frequency
  approx. 1 kHz
• Degree of protection
  IP67
• Cable length
  200 mm
• Angle deviation
  approx. 2 °
• Operation indicator
  LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  4.1 mm
• Light source
  LED
• Mission Time (TM)
  20 a
• Switching type
  NO contact / dark-on
• Storage temperature
  -20 ... 70 °C (-4 ... 158 °F)
• LED risk group labelling
  exempt group
• Ambient light limit
  EN 60947-5-2 : 25000 Lux
• Response time
  500 µs
• Housing height
  25.5 mm
• Threshold detection range
  700 mm,
• Optical face
  frontal
• No-load supply current
  Emitter: ≤ 11 mA, Receiver: ≤ 8 mA
UL approval
E87056 , cULus Recognized, Class 2 Power Source
Mass
approx. 10 g per sensor
Diameter of the light spot
approx. 90 mm at a distance of 500 mm
Test input
Test of switching function at 0 V
Product standard
EN 60947-5-2
Connection
200 mm fixed cable with 4-pin, M8x1 connector
Emitter
OBE500-R3F-S-0,2M-V31
Operating voltage
10 ... 30 V DC
Switching voltage
max. 30 V DC
Housing width
16 mm
Tightening torque, fastening screws
1 Nm
Effective detection range
0 ... 500 mm,
MTTFd
806 a
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
EAC conformity
TR CU 020/2011
Cable
PUR
Light type
modulated visible red light , 630 nm
Opening angle
approx. 5 °
Protection class
III
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate) and Stainless steel
Object size
typ. starts from 1.5 mm
Diagnostic Coverage (DC)
0 %
Switching current
max. 50 mA , resistive load
Ambient temperature
-25 ... 60 °C (-13 ... 140 °F)

OBE500-R3F-SE2-0,2M-V31 Related Documents