OBE500-R2F-SE2-0,2M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Angle deviation
  approx. 2 °
• MTTFd
  806 a
• Protection class
  III
• Housing width
  12 mm
• Receiver
  OBE500-R2F-E2-0,2M-V31
• Operation indicator
  LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
• No-load supply current
  Emitter: ≤ 11 mA, Receiver: ≤ 8 mA
• EAC conformity
  TR CU 020/2011
• Connection
  200 mm fixed cable with 4-pin, M8x1 connector
• Light source
  LED
• Operating voltage
  10 ... 30 V DC
• Switching current
  max. 50 mA , resistive load
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Opening angle
  approx. 5 °
• Mission Time (TM)
  20 a
• UL approval
  E87056 , cULus Recognized, Class 2 Power Source
• Housing
  PC (Polycarbonate) and Stainless steel
• Emitter
  OBE500-R2F-S-0,2M-V31
• Optical face
  frontal
• Switching type
  NO contact / dark-on
Response time
500 µs
Tightening torque, fastening screws
0.25 Nm
LED risk group labelling
exempt group
Ambient light limit
EN 60947-5-2 : 25000 Lux
Switching frequency
approx. 1 kHz
Degree of protection
IP67
Threshold detection range
700 mm,
Test input
Test of switching function at 0 V
Product standard
EN 60947-5-2
Housing depth
4.1 mm
Object size
typ. starts from 1.5 mm
Diameter of the light spot
approx. 90 mm at a distance of 500 mm
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
Housing height
25.5 mm
Cable
PUR
Effective detection range
0 ... 500 mm,
Function indicator
Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Voltage drop
≤ 1.5 V DC
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)
Mass
approx. 10 g per sensor
Light type
modulated visible red light , 630 nm
Diagnostic Coverage (DC)
0 %
Switching voltage
max. 30 V DC
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F)
Cable length
200 mm

OBE500-R2F-SE2-0,2M-V31 Related Documents