NJ20P+U1+A2 Pepperl + Fuchs Electronic Components

Product Details

• Reduction factor rCu
  1
• Voltage drop
  ≤ 3 V
• Ambient temperature
  -25 ... 70 °C (-13 ... 158 °F)
• Housing base
  PBT
• Output polarity
  DC
• Operating current
  0 ... 200 mA
• Operating voltage indicator
  LED, green
• Minimum core cross-section
  without wire end ferrule 0.5 mm², with connector sleeves 0.34 mm²
• Switching function
  complementary
• Switching frequency
  0 ... 200 Hz
• Reduction factor rAl
  1
• Time delay before availability
  ≤ 10 ms
• Information for connection
  A maximum of two conductors with the same core cross section may be mounted on one terminal connection!, tightening torque 1.2 Nm + 10 %
• Reduction factor rSt37
  0
• Short-circuit protection
  pulsing
• Standards
  EN 60947-5-2:2007, IEC 60947-5-2:2007
• Core cross section
  up to 2.5 mm²
• Installation
  non-flush
• Hysteresis
  1 ... 10 typ. 5 %
• MTTFd
  772 a
Maximum core cross-section
without wire end ferrule 2.5 mm², with connector sleeves 1.5 mm²
Rated operating distance
20 mm
Assured operating distance
1 ... 16.2 mm
Operating voltage
10 ... 30 V
No-load supply current
≤ 20 mA
Reduction factor rBrass
1 (Minimum distance: 2 mm)
Switching state indicator
LED, yellow
Output type
PNP
Diagnostic Coverage (DC)
0 %
Sensing face
PBT
Reverse polarity protection
reverse polarity protected
UL approval
cULus Listed, General Purpose
Housing material
PBT
CCC approval
CCC approval / marking not required for products rated ≤36 V
Degree of protection
IP68
Connection type
terminal compartment
CSA approval
cCSAus Listed, General Purpose

NJ20P+U1+A2 Related Documents