NJ20+U1+E2-Y287109 Pepperl + Fuchs Electronic Components

Product Details

• Assured operating distance
  0 ... 16.2 mm
• Reduction factor rAl
  0.35
• Voltage drop IL = 200 mA, switching element on
  1.2 ... 2.8 V typ. 2 V
• MTTFd
  819 a
• Sensing face
  PBT
• Rated operating distance
  20 mm
• Voltage drop
  ≤ 2.8 V
• No-load supply current
  ≤ 10 mA
• Ambient temperature
  -25 ... 70 °C (-13 ... 158 °F)
• Reduction factor rCu
  0.35
• Switching frequency
  0 ... 150 Hz
• Voltage drop IL = 100 mA, switching element on
  1 ... 2.6 V typ. 1.8 V
• Switching state indicator
  LED, yellow
• Diagnostic Coverage (DC)
  0 %
• Installation
  flush
• Voltage drop IL = 1 mA, switching element on
  0.5 ... 2.3 V typ. 0.9 V
• Voltage drop IL = 20 mA, switching element on
  0.9 ... 2.3 V typ. 1.5 V
• Mission Time (TM)
  20 a
• Minimum core cross-section
  without wire end ferrule 0.5 mm², with connector sleeves 0.34 mm²
• Output polarity
  DC
Reverse polarity protection
reverse polarity protected
Off-state current
0 ... 0.5 mA typ. 0.01 mA
Connection type
screw terminals
Maximum core cross-section
without wire end ferrule 2.5 mm², with connector sleeves 1.5 mm²
Switching function
Normally open (NO)
Voltage drop IL = 10 mA, switching element on
0.8 ... 2.2 V typ. 1.4 V
Operating current
0 ... 200 mA
UL approval
cULus Listed, General Purpose
Note
Sealing ring: Hole diameter 7 / 10.5 / 13 / 16 mm, The dimension of the connection cable must correspond to the hole selected on the sealing ring.
Output type
PNP
Short-circuit protection
pulsing
Off-state current TU =40 °C, switching element off
≤ 100 µA
Information for connection
A maximum of two conductors with the same core cross section may be mounted on one terminal connection!, tightening torque 1.2 Nm + 10 %
Housing material
PBT with Viton seals and PVDF screwed connection
Actual operating distance
18 ... 22 mm typ. 20 mm
Voltage drop IL = 50 mA, switching element on
0.9 ... 2.5 V typ. 1.6 V
Time delay before availability
≤ 50 ms
Storage temperature
-25 ... 85 °C (-13 ... 185 °F)
Reduction factor r304
0.8
Operating voltage indicator
LED, green
CCC approval
CCC approval / marking not required for products rated ≤36 V
Degree of protection
IP68
Operating voltage
10 ... 30 V
Hysteresis
1 ... 10 typ. 5 %
Standards
EN 60947-5-2:2007, IEC 60947-5-2:2007
Core cross section
up to 2.5 mm²

NJ20+U1+E2-Y287109 Related Documents