KFD0-SD2-EX1.1180 Pepperl + Fuchs Electronic Components

Product Details

• Current
  140 mA at 20 V input voltage, load = 140 Ω, 100 mA at 35 V input voltage, load = 140 Ω
• Ambient temperature
  -20 ... 60 °C (-4 ... 140 °F)
• Input/Output
  safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
• Power dissipation
  < 1 W (≤ 30 V)
• Display elements
  LED
• Marking
  II (1)G [Ex ia Ga] IIB, II (1)D [Ex ia Da] IIIB, I (M1) [Ex ia Ma] I (-20 °C ≤ T_amb≤ 60 °C)
• Safety Integrity Level (SIL)
  SIL 3
• Protection against electrical shock
  UL 61010-1:2004
• IECEx marking
  [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I, Ex ec IIC T4 Gc
• Output signal
  These values are valid for the rated operating voltage 20 ... 35 V DC.
• Dimensions
  20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
• Certificate
  TÜV 99 ATEX 1499 X
• Rated voltage
  loop powered
• Open loop voltage
  min. 22.7 V
• Mounting
  on 35 mm DIN mounting rail acc. to EN 60715:2001
• IECEx certificate
  IECEx BAS 06.0058, IECEx CML 19.0093X
• Signal type
  Digital Output
• Energized/De-energized delay
  single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs
• Output rated operating current
  80 mA
• EU-type examination certificate
  BASEEFA 06 ATEX 0252
Voltage
≥ 11 V
Directive 2014/30/EU
EN 61326-1:2013 (industrial locations)
Directive 2014/34/EU
EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Internal resistor
≤ 150 Ω
Mass
approx. 100 g
Maximum safe voltage
250 V (Attention! The rated voltage can be lower.)
Supplementary information
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Connection side
control side
Degree of protection
IEC 60529:2001
Control drawing
116-0309
Connection
terminals 7, 8
Labeling
space for labeling at the front
Electromagnetic compatibility
NE 21:2006
Power
1159 mW

KFD0-SD2-EX1.1180 Related Documents