7072-40871-7540030 Murr Elektronik Cable Assemblies

Product Details

• Weight
  60 g
• Series
  Connector Systems
• Material group
  IEC 60664-1, category I
• Housing
  Black plastic (gray on request)
• Approval (cable)
  cURus (AWM-Style 20549/10493); CE conform
• Shore hardness (wire isolation)
  70 ±5 D
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Torsion speed
  35 cycles/min
• Form
  40871
• Compression gland
  M12 (SW14)
• Cable identification
  754
• Construction (core)
  42× 0.15 mm (multi-strand wire class 6)
• Material property (jacket)
  CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
• Travel speed (C-track)
  max. 3 m/s
• Protection
  IP65, IP66K, IP67, IP68 inserted and tightened (EN 60529)
• Additional suppressor
  Diode/flyback diode
• Temperature range
  -25...+85 °C, depending on cable quality
• Material (wire isolation)
  PP
• Material (jacket)
  PUR
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
Product article number of manufacturer
7072-40871-7540030
Rated surge voltage
0.8 kV
Material
MSUD (PBT); M12 (PUR)
Cable weight [g/m]
40,7 g
Shore hardness (jacket)
90 ±5 A
Current load capacity
to DIN VDE 0298-4
No. of torsion cycles
max. 2 Mio. (25 °C)
Operating voltage
12...24 V DC
Mounting method
inserted, tightened
Resistor (core)
max. 26 Ω/km (20 °C)
Color/numbering of wires
br, bl
Test voltage
2500 V AC
Acceleration (C-track)
max. 10 m/s²
No. of poles
MSUD (4); M12 (2)
Locking material
Stainless steel 1.4305 (V2A)
Pollution Degree
3
Diameter (core)
2× 0.75 mm²
Shield
no
Torsion stress
±180°/m
Operating current per contact
max. 4 A
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)
Material (contact)
Copper alloy
Single wire Ø (core)
0.15 mm
Wire-Ø incl. isolation
1.7 mm ±5%
Nominal voltage
300 V AC
Bend radius (fixed)
5× outer Ø
LED display
yellow
Material (contact surface)
MSUD (Ag); M12(Au)
Material (wire)
Cu wire, bare
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
thermal resistance
flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
Bend radius (moving)
10× outer Ø
Switch off peak
max. 1.3 V
suitable for corrugated tube (internal Ø)
10 mm
Material (gasket)
Silicon
AWG
similar to AWG 18
Outer-Ø (jacket)
5.0 mm ±5%
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
Current consumption
7 mA
Standards
DIN EN 61076-2-101 (M12)
Cable Type
3 (PUR)
Stranding combination
2 wires twisted
Color (jacket)
black
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)
Cable length
0,3 m

7072-40871-7540030 Related Documents