7000-41101-6360400 Murr Elektronik Cable Assemblies

Product Details

• Weight
  235 g
• Series
  Connector Systems
• Operating current per contact
  max. 4 A
• Cable Type
  3 (PUR)
• Material property (wire isolation)
  CFC-, halogen-, cadmium-, silicone- and lead-free
• Shore hardness (jacket)
  90 ±5 A
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Operating voltage
  24 V AC ±20% / DC ±25%
• Approval (cable)
  cURus (AWM-Style 20549/10493); CE conform
• Wire-Ø incl. isolation
  1.85 mm ±5%
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Current consumption
  approx. 12 mA
• Material
  MSUD (PBT); M12 (PUR)
• Switch off peak
  max. 55 V
• Temperature range
  -25...+85 °C, depending on cable quality
• Construction (core)
  42× 0.15 mm (multi-strand wire class 6)
• Stranding combination
  3 wires twisted
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Torsion speed
  35 cycles/min
LED display
yellow
Switch off delay time
max. 20 ms
Resistor (core)
max. 26 Ω/km (20 °C)
Color/numbering of wires
bk numbered, gnye longitudinally striped
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Bend radius (fixed)
5× outer Ø
Rated surge voltage
0.8 kV
Compression gland
M12 (SW13)
Cable weight [g/m]
56,1 g
Material (wire isolation)
PP
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Travel speed (C-track)
max. 3 m/s
Cable length
4 m
Material group
IEC 60664-1, category I
Protection
IP67 inserted and tightened (EN 60529)
suitable for corrugated tube (internal Ø)
10 mm
Single wire Ø (core)
0.15 mm
Diameter (core)
3× 0.75 mm²
Form
41101
Housing
Black plastic (gray on request)
AWG
similar to AWG 18
Outer-Ø (jacket)
5.9 mm ±5%
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)
Locking of ports
M2.5/M12 (recommended torque 0.4/0.6 Nm)
Locking material
Zinc die casting, matte nickel plated
Cable identification
636
Pollution Degree
3
Material (wire)
Cu wire, bare
Shore hardness (wire isolation)
70 ±5 D
Shield
no
Material (jacket)
PUR
Current load capacity
to DIN VDE 0298-4
Acceleration (C-track)
max. 10 m/s²
Color (jacket)
black
Torsion stress
±180°/m
Nominal voltage
300 V AC
Test voltage
2500 V AC
Bend radius (moving)
10× outer Ø
Product article number of manufacturer
7000-41101-6360400

7000-41101-6360400 Related Documents