7000-40881-6360650 Murr Elektronik Cable Assemblies

Product Details

• Weight
  378 g
• Series
  Connector Systems
• Switch off peak
  max. 55 V
• Temperature range
  -25...+85 °C, depending on cable quality
• Construction (core)
  42× 0.15 mm (multi-strand wire class 6)
• Color/numbering of wires
  bk numbered, gnye longitudinally striped
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Bend radius (fixed)
  5× outer Ø
• Current consumption
  max. 15 mA
• Cable weight [g/m]
  56,1 g
• Stranding combination
  3 wires twisted
• Test voltage
  2500 V AC
• Torsion speed
  35 cycles/min
• LED display
  yellow
• Switch off delay time
  max. 20 ms
• Single wire Ø (core)
  0.15 mm
• Material (wire isolation)
  PP
• Color (jacket)
  black
• Bend radius (moving)
  10× outer Ø
• Cable length
  6,5 m
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)
suitable for corrugated tube (internal Ø)
10 mm
Cable identification
636
Diameter (core)
3× 0.75 mm²
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Acceleration (C-track)
max. 10 m/s²
Operating current per contact
max. 4 A
Compression gland
M12 (SW13)
Material (wire)
Cu wire, bare
Shield
no
Temperature range (fixed)
-40...+80 °C, (+90 °C at max. 10 000 operating hours)
Form
40881
Material (gasket)
PUR
Resistor (core)
max. 26 Ω/km (20 °C)
Material (jacket)
PUR
Travel speed (C-track)
max. 3 m/s
Housing
Black plastic (gray on request)
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Shore hardness (jacket)
90 ±5 A
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
No. of torsion cycles
max. 2 Mio. (25 °C)
Rated surge voltage
0.8 kV
Pollution Degree
3
Material
MSUD (PBT); M12 (PUR)
Shore hardness (wire isolation)
70 ±5 D
Outer-Ø (jacket)
5.9 mm ±5%
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)
Operating voltage
24 V AC ±20% / DC ±25%
Locking material
Zinc die casting, matte nickel plated
AWG
similar to AWG 18
Wire-Ø incl. isolation
1.85 mm ±5%
Current load capacity
to DIN VDE 0298-4
Product article number of manufacturer
7000-40881-6360650
Material group
IEC 60664-1, category I
Protection
IP67 inserted and tightened (EN 60529)
Cable Type
3 (PUR)
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Nominal voltage
300 V AC
Torsion stress
±180°/m

7000-40881-6360650 Related Documents