7000-40881-6360110 Murr Elektronik Cable Assemblies

Product Details

• Weight
  102 g
• Series
  Connector Systems
• Operating current per contact
  max. 4 A
• Material (gasket)
  PUR
• Cable weight [g/m]
  56,1 g
• Wire-Ø incl. isolation
  1.85 mm ±5%
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Torsion speed
  35 cycles/min
• Rated surge voltage
  0.8 kV
• Cable Type
  3 (PUR)
• Shore hardness (wire isolation)
  70 ±5 D
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Torsion stress
  ±180°/m
• Operating voltage
  24 V AC ±20% / DC ±25%
• Cable identification
  636
• Material property (wire isolation)
  CFC-, halogen-, cadmium-, silicone- and lead-free
• Color (jacket)
  black
• Bend radius (fixed)
  5× outer Ø
• Current consumption
  max. 15 mA
• Locking material
  Zinc die casting, matte nickel plated
Diameter (core)
3× 0.75 mm²
Outer-Ø (jacket)
5.9 mm ±5%
Bend radius (moving)
10× outer Ø
Cable length
1,1 m
LED display
yellow
suitable for corrugated tube (internal Ø)
10 mm
Material (wire isolation)
PP
Stranding combination
3 wires twisted
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
Protection
IP67 inserted and tightened (EN 60529)
Temperature range
-25...+85 °C, depending on cable quality
Single wire Ø (core)
0.15 mm
Material (jacket)
PUR
thermal resistance
flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
No. of torsion cycles
max. 2 Mio. (25 °C)
Switch off peak
max. 55 V
Compression gland
M12 (SW13)
AWG
similar to AWG 18
Shield
no
Current load capacity
to DIN VDE 0298-4
Acceleration (C-track)
max. 10 m/s²
Form
40881
Material
MSUD (PBT); M12 (PUR)
Pollution Degree
3
Material (wire)
Cu wire, bare
Shore hardness (jacket)
90 ±5 A
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)
Housing
Black plastic (gray on request)
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Test voltage
2500 V AC
Product article number of manufacturer
7000-40881-6360110
Material group
IEC 60664-1, category I
Switch off delay time
max. 20 ms
Resistor (core)
max. 26 Ω/km (20 °C)
Color/numbering of wires
bk numbered, gnye longitudinally striped
Nominal voltage
300 V AC
Travel speed (C-track)
max. 3 m/s

7000-40881-6360110 Related Documents