7000-40881-2560200 Murr Elektronik Cable Assemblies

Product Details

• Weight
  149 g
• Series
  Connector Systems
• Form
  40881
• Compression gland
  M12 (SW13)
• Construction (core)
  42× 0.15 mm (multi-strand wire class 6)
• Material property (wire isolation)
  CFC-, halogen-, cadmium-, silicone- and lead-free
• Shore hardness (jacket)
  58 ±3 D
• thermal resistance
  flame retardant UL, FT2, IEC 60332-1, IEC 60332-2-2, welding spark resistant
• Torsion stress
  ±360°/m
• Rated surge voltage
  0.8 kV
• Cable identification
  256
• Shore hardness (wire isolation)
  74 ±3 D
• Color (jacket)
  gray
• Product article number of manufacturer
  7000-40881-2560200
• Material group
  IEC 60664-1, category I
• Housing
  Black plastic (gray on request)
• Approval (cable)
  cURus (AWM-Style 20549/10493); CE conform
• Nominal voltage
  300 V AC
• Current load capacity
  to DIN VDE 0298-4
• Acceleration (C-track)
  max. 5 m/s²
LED display
yellow
Temperature range
-25...+85 °C, depending on cable quality
Cable weight [g/m]
48,4 g
Bend radius (moving)
10× outer Ø
Switch off peak
max. 55 V
suitable for corrugated tube (internal Ø)
10 mm
Cable Type
5 (PUR schweißfunkenbeständig)
AWG
similar to AWG 18
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis-, microbial- and welding spark resistant
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)
Travel speed (C-track)
max. 3.3 m/s
Material
MSUD (PBT); M12 (PUR)
Single wire Ø (core)
0.15 mm
Outer-Ø (jacket)
5.2 mm ±5%
Current consumption
max. 15 mA
Material (gasket)
PUR
Color/numbering of wires
bk numbered, gnye longitudinally striped
Bend radius (fixed)
5× outer Ø
Cable length
2 m
Operating voltage
24 V AC ±20% / DC ±25%
Protection
IP67 inserted and tightened (EN 60529)
Switch off delay time
max. 20 ms
Resistor (core)
max. 26 Ω/km (20 °C)
Stranding combination
3 wires twisted
Wire-Ø incl. isolation
1.7 mm ±5%
Temperature range (fixed)
-40...+80 °C, (+90 °C at max. 10 000 operating hours)
Torsion speed
35 cycles/min
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)
Locking material
Zinc die casting, matte nickel plated
Material (wire)
Cu wire, bare
Material (wire isolation)
PP
Shield
no
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
No. of torsion cycles
max. 1 Mio. (25 °C)
Operating current per contact
max. 4 A
Pollution Degree
3
Diameter (core)
3× 0.75 mm²
Material (jacket)
PUR
Test voltage
2500 V AC
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)

7000-40881-2560200 Related Documents