7000-40881-0361000 Murr Elektronik Cable Assemblies

Product Details

• Weight
  556 g
• Series
  Connector Systems
• Operating voltage
  24 V AC ±20% / DC ±25%
• Protection
  IP67 inserted and tightened (EN 60529)
• Construction (core)
  42× 0.15 mm (multi-strand wire class 6)
• Shore hardness (jacket)
  90 ±5 A
• Current load capacity
  to DIN VDE 0298-4
• Torsion stress
  ±180°/m
• Rated surge voltage
  0.8 kV
• suitable for corrugated tube (internal Ø)
  10 mm
• Resistor (core)
  max. 26 Ω/km (20 °C)
• Material (jacket)
  PUR
• Color (jacket)
  yellow
• Torsion speed
  35 cycles/min
• Current consumption
  max. 15 mA
• Housing
  Black plastic (gray on request)
• Diameter (core)
  3× 0.75 mm²
• Color/numbering of wires
  bk numbered, gnye longitudinally striped
• Nominal voltage
  300 V AC
• No. of torsion cycles
  max. 2 Mio. (25 °C)
Operating current per contact
max. 4 A
Material (gasket)
PUR
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
AWG
similar to AWG 18
Test voltage
2500 V AC
Product article number of manufacturer
7000-40881-0361000
Form
40881
Temperature range
-25...+85 °C, depending on cable quality
Material (wire)
Cu wire, bare
Stranding combination
3 wires twisted
Bend radius (fixed)
5× outer Ø
Cable length
10 m
Material group
IEC 60664-1, category I
Cable identification
036
Shield
no
Temperature range (fixed)
-40...+80 °C, (+90 °C at max. 10 000 operating hours)
Acceleration (C-track)
max. 10 m/s²
Compression gland
M12 (SW13)
Pollution Degree
3
Shore hardness (wire isolation)
70 ±5 D
Outer-Ø (jacket)
5.9 mm ±5%
Travel speed (C-track)
max. 3 m/s
Locking of ports
M3/M12×1 mm (recommended torque 0.4/0.6 Nm)
Switch off delay time
max. 20 ms
Cable Type
3 (PUR)
Wire-Ø incl. isolation
1.85 mm ±5%
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
LED display
yellow
Locking material
Zinc die casting, matte nickel plated
Cable weight [g/m]
56,1 g
Material (wire isolation)
PP
thermal resistance
flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
Bend radius (moving)
10× outer Ø
Switch off peak
max. 55 V
Material
MSUD (PBT); M12 (PUR)
Single wire Ø (core)
0.15 mm
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Temperature range (mobile)
-25...+80 °C, (+90 °C at max. 10 000 operating hours)

7000-40881-0361000 Related Documents