7000-40861-6300060 Murr Elektronik Cable Assemblies

Product Details

• Weight
  53 g
• Series
  Connector Systems
• Current consumption
  5 mA
• Compression gland
  M8 (SW9), M12 (SW13)
• Cable weight [g/m]
  26,4 g
• Shore hardness (wire isolation)
  70 ±5 D
• chemical resistance
  good resistance to oil, gasoline and chemicals (EN 60811-404)
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Cable length
  0,6 m
• Rated surge voltage
  0.8 kV
• Mounting method
  inserted, tightened
• Resistor (core)
  max. 79 Ω/km (20 °C)
• LED display
  LED (yellow/green)
• suitable for corrugated tube (internal Ø)
  M12 (10 mm); M8 (6.5 mm)
• Cable identification
  630
• Material property (wire isolation)
  CFC-, halogen-, cadmium-, silicone- and lead-free
• Pollution Degree
  3
• Construction (core)
  32× 0.1 mm (multi-strand wire class 6)
• Shield
  no
• Bend radius (fixed)
  5× outer Ø
Wire-Ø incl. isolation
1.25 mm ±5%
Shore hardness (jacket)
90 ±5 A
Acceleration (C-track)
max. 10 m/s²
Outer-Ø (jacket)
4.1 mm ±5%
Travel speed (C-track)
max. 3 m/s
Color (jacket)
black
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
thermal resistance
flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
Product article number of manufacturer
7000-40861-6300060
No. of torsion cycles
max. 2 Mio. (25 °C)
Material group
IEC 60664-1, category I
Protection
IP67 inserted and tightened (EN 60529)
Single wire Ø (core)
0.1 mm
Material (jacket)
PUR
Nominal voltage
300 V AC
No. of poles
M12, 4-pole – M8, 3-pole
Material (contact)
Copper alloy
Cable Type
3 (PUR)
AWG
similar to AWG 24
Locking of ports
Screw thread (M8/M12×1 mm) recommended torque 0.4/0.6 Nm, self-securing
Operating current per contact
max. 4 A
Locking material
Zinc die casting, matte nickel plated
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Stranding combination
3 wires twisted
Operating voltage (only UL listed)
30 V DC
Material
PUR
Temperature range
-25...+85 °C, depending on cable quality
Color/numbering of wires
br, bk, bl
Test voltage
2500 V AC
Torsion stress
±180°/m
Operating voltage
24 V DC ±25%
Standards
DIN EN 61076-2-101 (M12), DIN EN 61076-2-104 (M8)
Material (gasket)
FKM
Diameter (core)
3× 0.25 mm²
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Temperature range (fixed)
-40...+80 °C, (+90 °C at max. 10 000 operating hours)
Torsion speed
35 cycles/min
Form
40861
Material (contact surface)
Au
Material (wire)
Cu wire, bare
Material (wire isolation)
PP
Current load capacity
to DIN VDE 0298-4
Bend radius (moving)
10× outer Ø

7000-40861-6300060 Related Documents