7000-12341-2342000 Murr Elektronik Cable Assemblies

Product Details

• Weight
  796 g
• Series
  Connector Systems
• Product article number of manufacturer
  7000-12341-2342000
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Cable length
  20 m
• Torsion speed
  35 cycles/min
• Torsion stress
  ±180°/m
• Acceleration (C-track)
  max. 10 m/s²
• Travel speed (C-track)
  max. 3 m/s
• Bend radius (fixed)
  5× outer Ø
• Test voltage
  2500 V AC
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• Nominal voltage
  300 V AC
• No. of bending cycles (C-track)
  max. 10 Mio. (25 °C)
• Current load capacity
  to DIN VDE 0298-4
• Temperature range (fixed)
  -40...+80 °C, (+90 °C at max. 10 000 operating hours)
• Bend radius (moving)
  10× outer Ø
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Color (jacket)
  gray
• Color/numbering of wires
  br, bk, bl, wh
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Shore hardness (jacket)
90 ±5 A
Outer-Ø (jacket)
4.5 mm ±5%
Stranding combination
4 wires twisted
Material (jacket)
PUR
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Shield
no
Wire-Ø incl. isolation
1.25 mm ±5%
Material (wire isolation)
PP
AWG
similar to AWG 22
Cable weight [g/m]
36,3 g
Diameter (core)
4× 0.34 mm²
Shore hardness (wire isolation)
70 ±5 D
Resistor (core)
max. 57 Ω/km (20 °C)
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Material (wire)
Cu wire, bare
Construction (core)
42× 0.1 mm (multi-strand wire class 6)
Single wire Ø (core)
0.1 mm
Cable Type
3 (PUR)
Cable identification
234
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Stripping length (jacket)
20 mm
Temperature range
-25...+85 °C, depending on cable quality
Pollution Degree
3
Material (contact surface)
Au
Material (gasket)
FKM
Mounting method
inserted, tightened
Material (contact)
Copper alloy
suitable for corrugated tube (internal Ø)
10 mm
Compression gland
M12 (SW13)
Standards
DIN EN 61076-2-101 (M12)
Locking material
Zinc die casting, matte nickel plated
Material
PUR
Coding
A-coded
Operating current per contact
max. 4 A
Locking of ports
Screw thread (M12×1 mm) recommended torque 0.6 Nm, self-securing
Protection
IP65, IP66K, IP67 inserted and tightened (EN 60529)
Material group
IEC 60664-1, category I
Rated surge voltage
2.5 kV
Operating voltage (only UL listed)
max. 30 V AC/DC
Form
12341
Operating voltage
max. 250 V AC/DC

7000-12341-2342000 Related Documents