5551001 Murr Elektronik Electronic Components

Product Details

• Dimensions H×W×D
  102×63×225 mm
• Sensor-system/actuator supply
  Push Pull Power connector, max. 16 A
• Protection
  IP67
• I/O ports
  M12, 5-pole, A-coded
• Product article number of manufacturer
  5551001
• Sensor supply US
  24 V DC (EN 61131-2), max. 700 mA (M12 female), short-circuit and overload protected
• Transfer parameters
  32 Byte (In) 32 Byte (Out) per IO-Link port
• PROFINET Netload Class
  III
• Communication status
  via LED
• Wire break detection
  yes
• Temperature range
  -20...+60 °C (storage temperature -40...+85 °C)
• Fieldbus
  Ethernet 10/100 Mbit/s; Push Pull RJ45 Data connector
• Category
  X0, X1, X2, X3 up to 4, X7 (PIN 3) up to 3
• Monitoring - no voltage
  yes
• Type
  for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
• IO-Link
  2× Master
• Shared Device
  yes, for 2 controls
• Diagnostic via BUS
  per module and channel
• Specification
  IO-Link Master V1.1.2
• Operating modes
  COM1; COM2; COM3 (automatic)
Service life
20 years
Short-circuit and overload
yes
Switching current per output
max. 2 A (short-circuit and overload protected)
PIN 4
Input/Output (port X4, X5); Input (port X6, X7)
PFH
IEC 62061: 4.8E-9 1/h; IEC 61508: 7.8E-10 1/h
Monitoring - under voltage
yes
Mounting method
2-hole screw mounting
PIN 2
Input/Output (port X4, X5); Input (port X6)
SIL
X0, X1, X2, X3 up to 3, X7 (PIN 3) up to 2
Diagnostic via LED
per module and channel
Actuator supply UA
24 V DC (EN 61131-2), max. 8 A
Addressing
DCP
SIL CL
up to 3
Port Class
1× Class A; 1× Class B (galvanically separated)
MRP
yes
Cross-link detection
Sensor/Actuator
PL
X0, X1, X2, X3 up to e, X7 (PIN 3) up to d
Actuator warning
per channel via LED and BUS

5551001 Related Documents