27592 Murr Elektronik I/O Distributors

Product Details

• Weight
  4710 g
• Series
  Distribution Systems
• Protection
  IP65, IP67, IP68 inserted and tightened (EN 60529)
• Wire isolation
  TPE (grpk, wh, rdbl, gn, whgn, ye, brgn, gr, whye, pk, yebr, rd, whgr, bk, grbr, vi, br, bl, gnye)
• Shore hardness (wire isolation)
  55 ±5 D
• Bend radius (fixed)
  5× outer Ø
• PIN 1
  (+)
• Required power supply with max. ports
  max. 20 A
• Outer Ø
  11.5 mm ±5%
• Temperature range (fixed)
  -40...+90 °C
• Operating voltage
  24 V DC (EN 61131-2), potential separation 0 V for left/right side
• Total current
  max. 10 A
• Material (wire isolation)
  TPE-E
• Test voltage
  2000 V AC
• PIN 3
  (-)
• Locking of ports
  Screw thread (M12×1 mm)
• Dimensions H×W×D
  145×55×21 mm
• Diameter (core)
  16× 0.34 + 5× 0.75 mm²
• Shield
  yes
• PIN 2
  (NC)/(S2)
LED display per port
LED (yellow): contact 4 and 2; 2× LED (red): for failure
Approval (cable)
UL (AWM-Style 20233/10042), CSA; CE conform
Nominal voltage
300/500 V AC
Diagnostic output
active high, max. load 25 mA, wire (brown 2)
Inrush capacity
max. 1470 µF
Resistor (core)
max. 57 Ω/km (0.34 mm²), max. 26 Ω/km (0.75 mm²); (20 °C)
Current load capacity
to DIN VDE 0298-4
Travel speed (C-track)
max. 2 m/s
Operating current (contact 3)
max. 2 A (shutoff 2.3...2.7 A)
No./diameter of wires
16× 0.34 + 5× 0.75 mm²
Cable number
403
Bend radius (moving)
10× outer Ø
PIN 4
(NO)/(S1)
Current consumption
max. 35 mA
Unit protection
pulse switching
AWG
similar to AWG 22 (0.34 mm²); similar to AWG 18 (0.75 mm²)
Temperature range (mobile)
-25...+80 °C
Acceleration (C-track)
max. 5 m/s²
PIN 5
(Earth)
Housing
Zinc die casting, matte nickel plated
C-track properties
5 Mio.
Single wire Ø (core)
0.1 mm
Shore hardness (jacket)
85 ±5 A
Material (jacket)
PUR (UL/CSA)
Functional description
All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-reseting). Supply voltage of other ports remains the same. In case of a fault the DIAGNOSTIC signal “active high”
LED display
LED (green): P1 and P2; LED (red): ERROR for optical diagnostics
Temperature range
-20...+60 °C
Material (wire)
Cu wire, bare
Jacket Color
gray
No. of bending cycles (C-track)
max. 5 Mio. (25 °C)
Product article number of manufacturer
27592

27592 Related Documents