SRB200X2 Schmersal Electronic Components

Product Details

• Stop-Category
  0
• Number of LEDs
  3
• Tightening torque of Clips
  0.6 Nm
• Rated impulse withstand voltage Uimp
  4 kV
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• ON delay at automatic start
  Adjustable
• Switching capacity, minimum
  10 VDC
• Material of the contacts, electrical
  AgSn0. self-cleaning, positive drive
• Short-circuit recognition
  Yes
• Mechanical life, minimum
  10,000,000 Operations
• Depth
  121 mm
• Ambient temperature, maximum
  +60 °C
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Note (Contact resistance)
  in new state
• Voltage, Utilisation category AC15
  250 VAC
• Wire breakage detection
  Yes
• Number of openers
  2
• Number of safety contacts
  2
• Cable section, maximum
  2.5 mm²
• Storage and transport temperature, minimum
  -40 °C
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -15%/+20%, residual ripple max. 10%
Contact resistance, maximum
0.1 Ω
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Mounting
Snaps onto standard DIN rail to EN 60715
Height
100 mm
Overvoltage category
III
Rated control voltage at DC, maximum
28.8 VDC
Electrical power consumption
3 VA
Pull-in delay at RESET, typically
20 ms
Switching capacity, maximum
250 VAC
Electronic Fuse
Yes
Start input
Yes
Terminal Connector
Screw connection, rigid or flexible
Width
22.5 mm
Storage and transport temperature, maximum
+85 °C
Degree of pollution to IEC/EN 60664-1
2
Current, Utilisation category AC-15
6 A
Conduction resistance, maximum
40 Ω
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Earth connection detection
Yes
Cable section, minimum
0.25 mm²
Degree of protection of the mounting space
IP54
Restistance to shock
30 g / 11 ms
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Drop-out delay in case of power failure, typically
80 ms
Voltage, Utilisation category DC13
24 VDC
EMC rating
EMC-Directive
Climatic stress
EN 60068-2-78
Reset edge detection
Yes
Terminal designations
IEC/EN 60947-1
Ambient temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Drop-out delay in case of emergency, typically
20 ms
Current, Utilisation category DC13
6 A
Gross weight
230 g
Feedback circuit
Yes
Integral System Diagnostics, status
Yes
Degree of protection of the enclosure
IP40
Degree of protection of clips or terminals
IP20
Frequency range
50 Hz, 60 Hz
Rated AC voltage for controls at DC minimum
20.4 VDC
Pull-in delay at automatic start, maximum, typically
100 ms

SRB200X2 Related Documents