AZM400Z-ST-I2-1P2P-BOW Schmersal Safety Accessories

Product Details

• Securing holes for Bowden cable assembly
  Yes
• Active principle
  Magnetic field, RFID
• Gross weight
  856.9 g
• Note (Mechanical lifetime)
  Which have a lateral force Ftrans = 100 N: 100.000 operations
• Guard locking monitored
  Yes
• Length of sensor
  46.7 mm
• Protection rating
  III
• Switching frequency, approx.
  0.3 Hz
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Minimum distance devices
  30 mm
• Terminal Connector
  Connector M12, 8-pole
• Storage and transport temperature, maximum
  +85 °C
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Switching thresholds of the control inputs
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current consumption, maximum
  600 mA
• Rated operating voltage
  24 VDC
• Voltage drop Ud, maximum
  2 V
• Operating current
  50 mA
• Voltage, Utilisation category DC12
  24 VDC
Reaction time, maximum
100 ms
Integral System Diagnostics, status
Yes
Interlocking principle
bistable
Lateral force at bolt return, maximal (against locked door)
300 N
Ambient temperature, minimum
-20 °C
Rated insulation voltage Ui
32 VDC
No-load supply current I0
100 mA
Allowable discrepancy time (input), maximum
10 s
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Number of safety contacts
2
Mechanical life, minimum
1,000,000 Operations
Tightening torque of the fixing screws Bowden cable
1.2 Nm
Height of sensor
166.7 mm
Degree of pollution to VDE 0100
3
Open / close cycle (Motor), minimum
3
Rated operating current (safety outputs)
250 mA
Short circuit detection
Yes
Number of diagnostic signals
1
Tightening torque of the screw
8 Nm
Ambient temperature, maximum
+55 °C
Rated impulse withstand voltage Uimp
0.8 kV
Required rated short-circuit current to EN 60947-5-1
100 A
Current leakage Ir
1.5 mA
general information
Individual coding, multiple teaching
Short-circuit recognition
Yes
Clamping force in accordance with ISO14119 Fzh
10,000 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Restistance to shock
30 g / 11 ms
Current consumption at 24V, maximum
15 mA
Minimal average cycle time (with continuous operation)
20 s
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC13
0.05 A
Enclosure material
Light alloy die-casting
Coding level according to ISO 14119
High
Clamping force, maximum Fmax
13,000 N
Width of sensor
77.8 mm
Current consumption at 24V, minimum
10 mA
Overvoltage category
III
Current, Utilisation category DC12
0.05 A
Classification ZVEI CB24I, Sink
C1, C2
Time to readiness, maximum
1,500 ms
Safety functions
Yes
Note (Lateral force at bolt return)
Does not apply to emergency exit, Bowden cable and manual release
Storage and transport temperature, minimum
-40 °C
Operating Current
100 mA

AZM400Z-ST-I2-1P2P-BOW Related Documents