AZM 200ST2-T-SD2PA Schmersal Safety Switch Interlocks

Product Details

• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Safety functions
  Yes
• Latching force
  30 N
• Width of sensor
  40 mm
• Relative humidity, maximum
  95 %
• Operating voltage, minimum
  20.4 VDC
• Current leakage Ir
  0.5 mA
• Time to readiness, maximum
  4,000 ms
• Integral System Diagnostics, status
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Height of sensor
  220 mm
• Note (Relative humidity)
  non-condensing
• Active principle
  inductive
• Series-wiring
  Yes
• Terminal Connector
  Connector M12, 8-pole
• Relative humidity, minimum
  30 %
• Rated impulse withstand voltage Uimp
  0.8 kV
• Duration of risk, maximum
  120 ms
• Guard locking monitored
  Yes
• Reaction time, maximum
  60 ms
Serial diagnostics
Yes
Short circuit detection
Yes
Number of safety contacts
2
Clamping force in accordance with ISO14119 Fzh
2,000 N
Ambient temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Overvoltage category
III
Degree of pollution to VDE 0100
3
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Manual release
Yes
Length of sensor
50 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
No-load supply current I0
600 mA
Current, Utilisation category DC13
0.05 A
Actuating speed, maximum
0.2 m/s
Ambient temperature, maximum
+50 °C
Protection rating
II
Operating current
1,200 mA
Power to lock
Yes
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Rated operating current (safety outputs)
250 mA
Standards
IEC 61508, EN 60947-5-1, EN ISO 13849-1
Gross weight
490 g
Number of Series-wiring of sensors
31
Degree of protection
IP67 to EN 60529
Restistance to shock
30 g / 11 ms
Voltage drop Ud, maximum
4 V
Voltage, Utilisation category DC13
24 VDC
Switching frequency, approx.
1 Hz
Operating voltage, maximum
26.4 VDC

AZM 200ST2-T-SD2PA Related Documents