AZM 200ST2-T-1P2PWA Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN ISO 13849-1
• Number of safety contacts
  2
• Latching force
  30 N
• Relative humidity, maximum
  95 %
• Rated insulation voltage Ui
  32 VDC
• Rated operating current (safety outputs)
  250 mA
• Time to readiness, maximum
  4,000 ms
• Integral System Diagnostics, status
  Yes
• Manual release
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Ambient temperature, maximum
  +50 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Duration of risk, maximum
  120 ms
• Series-wiring
  Yes
• Height of sensor
  220 mm
• Relative humidity, minimum
  30 %
• Switching frequency, approx.
  1 Hz
• Gross weight
  560 g
• Short-circuit recognition
  Yes
• Degree of protection
  IP67 to EN 60529
Storage and transport temperature, maximum
+85 °C
No-load supply current I0
600 mA
Current, Utilisation category DC13
0.05 A
Guard locking monitored
Yes
Short circuit detection
Yes
Terminal Connector
Connector M12, 8-pole
Note (Relative humidity)
non-condensing
Active principle
inductive
Clamping force in accordance with ISO14119 Fzh
2,000 N
Width of sensor
40 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Degree of pollution to VDE 0100
3
Operating voltage, maximum
26.4 VDC
Enclosure material
Glass-fibre, reinforced thermoplastic
Reaction time, maximum
60 ms
Mechanical life, minimum
1,000,000 Operations
Length of sensor
50 mm
Restistance to shock
30 g / 11 ms
Operating current
50 mA
Power to lock
Yes
Safety functions
Yes
Ambient temperature, minimum
-25 °C
Protection rating
II
Overvoltage category
III
Current leakage Ir
0.5 mA
Actuating speed, maximum
0.2 m/s
Switching thresholds
-3 V … 5 V (Low), 15 V … 30 V (High)
Operating voltage, minimum
20.4 VDC
Voltage drop Ud, maximum
4 V
Voltage, Utilisation category DC13
24 VDC
Storage and transport temperature, minimum
-25 °C

AZM 200ST2-T-1P2PWA Related Documents