AZM 200CC-T-SD2P Schmersal Safety Switch Interlocks

Product Details

• Time to readiness, maximum
  4,000 ms
• Mechanical life, minimum
  1,000,000 Operations
• Latching force
  30 N
• Cable section, maximum
  1.5 mm²
• Ambient temperature, minimum
  -25 °C
• Protection rating
  II
• No-load supply current I0
  600 mA
• Reaction time, maximum
  60 ms
• Integral System Diagnostics, status
  Yes
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Relative humidity, minimum
  30 %
• Rated impulse withstand voltage Uimp
  0.8 kV
• Active principle
  inductive
• Short circuit detection
  Yes
• Number of safety contacts
  2
• Wire cross-section, maximum
  15 AWG
• Current leakage Ir
  0.5 mA
• Power to unlock
  Yes
• Series-wiring
  Yes
• Terminal Connector
  Spring pulley connection
Height of sensor
220 mm
Restistance to shock
30 g / 11 ms
Switching frequency, approx.
1 Hz
Standards
IEC 61508, EN 60947-5-1, EN ISO 13849-1
Clamping force, maximum Fmax
2,600 N
Length of sensor
50 mm
Relative humidity, maximum
95 %
Operating voltage, maximum
26.4 VDC
Clamping force in accordance with ISO14119 Fzh
2,000 N
Width of sensor
40 mm
Storage and transport temperature, maximum
+85 °C
Voltage, Utilisation category DC13
24 VDC
Serial diagnostics
Yes
Safety functions
Yes
Cable section, minimum
0.25 mm²
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Manual release
Yes
Number of Series-wiring of sensors
31
Wire cross-section, minimum
23 AWG
Ambient temperature, maximum
+60 °C
Degree of pollution to VDE 0100
3
Voltage drop Ud, maximum
4 V
Enclosure material
Glass-fibre, reinforced thermoplastic
Guard locking monitored
Yes
Duration of risk, maximum
120 ms
Short-circuit recognition
Yes
Actuating speed, maximum
0.2 m/s
Degree of protection
IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Operating current
1,200 mA
Overvoltage category
III
Rated operating current (safety outputs)
250 mA
Note (Relative humidity)
non-condensing
Current, Utilisation category DC13
0.05 A
Operating voltage, minimum
20.4 VDC
Switching thresholds
-3 V … 5 V (Low), 15 V … 30 V (High)

AZM 200CC-T-SD2P Related Documents