AZM 161 BZ ST1-AS R Schmersal Safety Switch Interlocks

Product Details

• Integral System Diagnostics, status
  Yes
• Connector position
  Bottom
• Height of sensor
  90 mm
• Degree of pollution to VDE 0100
  3
• AS-i, IO-Code
  0x7
• AS-i Outputs, DO 0
  Solenoid control
• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Width of sensor
  130 mm
• AS-i Profile
  S-7.B.F.E
• AS-i, ID-Code
  0xB
• AS-i Outputs, DO 3
  No Function
• AS-i Parameter bits, P3
  Error message - locking/unlocking of the solenoid interlock blocked
• Manual release
  Yes
• Clamping force
  2,000 N
• Storage and transport temperature, maximum
  +85 °C
• Switching frequency
  1,000 /h
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Parameter bits, P1
  Solenoid interlock locked
• Power to unlock
  Yes
Actuating play in direction of actuation
5.5 mm
Relative humidity, maximum
95 %
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P0
Actuator detected
Active principle
electromechanical
Number of actuating directions
3
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
AS-i Specification
Safety-Slave
AS-i, ID-Code1
0xF
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Actuator and interlock combined monitored
Yes
Actuating speed, maximum
2 m/s
Degree of protection
IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Overvoltage category
III
AS-i Current consumption, maximum
250 mA
AS-i Outputs, DO 2
No Function
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF)
Reaction time, maximum
100 ms
Latching force
30 N
Note (Relative humidity)
non-condensing, non-icing
AS-i Operating voltage, minimum
26.5 VDC
AS-i, ID-Code2
0xE
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Mechanical life, minimum
1,000,000 Operations
Relative humidity, minimum
30 %
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Version
V 2.1
AS-i Outputs, DO 1
No Function
AS-i Input module address
0
Gross weight
465 g
Length of sensor
30 mm
Ambient temperature, maximum
+60 °C
Protection rating
II
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission

AZM 161 BZ ST1-AS R Related Documents