AZM 161 B ST2-AS RA Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Actuator monitored
  Yes
• Length of sensor
  30 mm
• Storage and transport temperature, maximum
  +85 °C
• Note (Relative humidity)
  non-condensing, non-icing
• Switching frequency
  1,000 /h
• AS-i, IO-Code
  0x7
• AS-i Outputs, DO 3
  No Function
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• Power to lock
  Yes
• Actuating play in direction of actuation
  5.5 mm
• Latching force
  30 N
• Ambient temperature, minimum
  -25 °C
• Restistance to shock
  30 g / 11 ms
• AS-i Current consumption, maximum
  250 mA
• AS-i Outputs, DO 2
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Manual release
  Yes
• Reaction time, maximum
  100 ms
• Width of sensor
  130 mm
Relative humidity, maximum
95 %
Degree of pollution to VDE 0100
3
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P1
Solenoid interlock locked
Gross weight
495 g
Connector position
Right
Relative humidity, minimum
30 %
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Version
V 2.1
AS-i, ID-Code2
0xE
AS-i Parameter bits, P0
Actuator detected
Mechanical life, minimum
1,000,000 Operations
Actuating speed, maximum
2 m/s
Height of sensor
90 mm
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Outputs, DO 0
Solenoid control
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
Clamping force
2,000 N
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Ambient temperature, maximum
+60 °C
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
AS-i Operating voltage, minimum
26.5 VDC
AS-i, ID-Code
0xB
AS-i Input module address
0
Number of actuating directions
3
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Degree of protection
IP67 to EN 60529
Protection rating
II
AS-i Specification
Safety-Slave
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Active principle
electromechanical
Integral System Diagnostics, status
Yes
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i, ID-Code1
0xF

AZM 161 B ST2-AS RA Related Documents