AZM 161 B ST1-AS RA Schmersal Safety Switch Interlocks

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Clamping force
  2,000 N
• Ambient temperature, minimum
  -25 °C
• Relative humidity, maximum
  95 %
• Degree of pollution to VDE 0100
  3
• AS-i Operating voltage, minimum
  26.5 VDC
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Manual release
  Yes
• Number of actuating directions
  3
• Ambient temperature, maximum
  +60 °C
• Restistance to shock
  30 g / 11 ms
• AS-i Profile
  S-7.B.F.E
• AS-i Outputs, DO 2
  No Function
• AS-i Parameter bits, P3
  Error message - locking/unlocking of the solenoid interlock blocked
• Integral System Diagnostics, status
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Width of sensor
  130 mm
• Rated insulation voltage Ui
  32 VDC
• AS-i Operating voltage AS-i maximum
  31.6 VDC
AS-i, ID-Code1
0xF
AS-i Outputs, DO 3
No Function
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Degree of protection
IP67 to EN 60529
Relative humidity, minimum
30 %
Switching frequency
1,000 /h
AS-i, ID-Code2
0xE
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF)
Reaction time, maximum
100 ms
Actuating play in direction of actuation
5.5 mm
Length of sensor
30 mm
Protection rating
II
AS-i Current consumption, maximum
250 mA
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input module address
0
Power to lock
Yes
Actuating speed, maximum
2 m/s
Storage and transport temperature, maximum
+85 °C
Overvoltage category
III
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
Actuator detected
Gross weight
490 g
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Resistance to vibrations to EN 60068-2-6
10 Hz ... 150 Hz, amplitude 0.35 mm
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code
0xB
AS-i Parameter bits, P1
Solenoid interlock locked
Actuator monitored
Yes
Connector position
Bottom
Height of sensor
90 mm
Rated impulse withstand voltage Uimp
0.8 kV
AS-i, IO-Code
0x7
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Active principle
electromechanical
Latching force
30 N
Storage and transport temperature, minimum
-25 °C
Note (Relative humidity)
non-condensing, non-icing
AS-i Version
V 2.1
AS-i Outputs, DO 0
Solenoid control

AZM 161 B ST1-AS RA Related Documents