RLK28-55-1518 Pepperl + Fuchs Electronic Components

Product Details

• Polarization filter
  yes
• Operation indicator
  LED green
• Switching voltage
  max. 250 V AC/DC
• Housing width
  25.8 mm
• Protection class
  II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140., Caution!, The protection class 2 is only valid when the terminal compartment is closed
• Optical face
  Plastic pane
• Diameter of the light spot
  approx. 290 mm at a distance of 17 m
• Reflector distance
  0.05 ... 17 m
• Operating voltage
  12 ... 240 V AC/DC
• Product standard
  EN 60947-5-2
• Light source
  LED
• Switching type
  light/dark on switchable
• Effective detection range
  0 ... 17 m
• MTTFd
  600 a
• Storage temperature
  -40 ... 60 °C (-40 ... 140 °F)
• Mass
  112 g
• Light type
  modulated visible red light , 660 nm
• Diagnostic Coverage (DC)
  0 %
• Switching frequency
  25 Hz
• Threshold detection range
  21 m,
Control elements
sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
Ambient light limit
80000 Lux
Signal output
relay, 1 NO
Housing depth
65.5 mm
Opening angle
emitter 1.2°, receiver 2°
Mission Time (TM)
20 a
Switching current
max. 2 A
Housing height
88 mm
Power consumption
≤ 3.5 VA
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
Connection
connector M18, 4-pin
Switching power
DC: max. 50 W AC: max. 500 VA
Degree of protection
IP67
Reference target
H85-2 reflector
Function indicator
2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Response time
20 ms
Housing
Plastic ABS

RLK28-55-1518 Related Documents