RL91-6-IR/25/38A/115 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  H85-2 reflector
• Response time
  20 ms
• Mass
  100 g
• Opening angle
  approx. 2.5 °
• Switching power
  max. 24 W / 55 VA
• No-load supply current
  < 100 mA
• Switching type
  light-on
• Reflector distance
  0 ... 6 m
• Signal output
  Weak current relay, 1 alternator
• Switching current
  1 A /24 V DC, 0.5 A /110 V AC
• Connection
  5 m fixed cable
• Ambient light limit
  90000 Lux
• Switching voltage
  ≤ 55 V AC / 24 V DC
• UL approval
  cULus, For overcurrent protection, install a fuse with a rated current of max. 5 A and min. 55 V AC
• Degree of protection
  IP65
• Function indicator
  LED red, flashes when falling short of the operating reserve
• Product standard
  EN 60947-5-2
• Optical face
  Luran^®
• Light source
  LED
• Diameter of the light spot
  approx. 230 mm at a distance of 6000 mm
Switching frequency
25 Hz
CCC approval
CCC approval / marking not required for products rated ≤36 V
Effective detection range
0 ... 6 m
Ambient temperature
-20 ... 55 °C (-4 ... 131 °F)
Storage temperature
-20 ... 75 °C (-4 ... 167 °F)
Threshold detection range
9 m
Light type
modulated infrared light
MTTFd
1083.4 a
Operating voltage
12 ... 30 V DC / 18 ... 28 V AC
Housing
Luran^®
Note
Safety fuse ≤ 315 mA (slow-blow) according to IEC 60127-2 Sheet 1, Recommendation: after a short circuit, check that the device is functioning correctly.

RL91-6-IR/25/38A/115 Related Documents