MLV41-LL-RT/95/136 Pepperl + Fuchs Electronic Components

Product Details

• Diagnostic Coverage (DC)
  0 %
• Response time
  0.5 ms
• Voltage drop
  ≤ 2.5 V DC
• Ambient temperature
  -20 ... 60 °C (-4 ... 140 °F)
• Light source
  LED
• No-load supply current
  max. 40 mA
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Connection
  M8 x 1 connector, 4-pin
• Reference target
  100 mm x 100 mm on Kodak white, reflection factor 90%
• Operation indicator
  LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
• Function indicator
  LED yellow, lights up with receiver lit ; flashes when falling short of the stability control
• Switching current
  max. 100 mA
• UL approval
  cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
• Fiber optic adapter
  04
• Housing height
  56.5 mm
• Connector
  metal
• Mission Time (TM)
  20 a
• Storage temperature
  -40 ... 75 °C (-40 ... 167 °F)
• Control elements
  Sensitivity adjuster, light/dark switch
• Housing width
  31 mm
Optical face
Fiber optic connection
Adjustment range
0 ... 120 mm on Kodak white, reflection factor 90%
Operating voltage
10 ... 30 V DC
Switching voltage
max. 30 V DC
Housing depth
13.6 mm
MTTFd
770 a
Switching type
light/dark on switchable, The switching modes specified in the "Electrical Connection" section apply to L/D switches in the "D" position (dark switch)
Switching frequency
1000 Hz
Degree of protection
IP67
Light type
modulated visible red light , 660 nm
Ripple
max. 10 %
Product standard
EN 60947-5-2
Mass
50 g
Sensor range
on black (6 %): up to 36 mm, on Kodak white, reflection factor 90% up to 120 mm, with LLR 04-1.6-0.5-WC3 fiberoptic cable
Signal output
2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
EAC conformity
TR CU 020/2011
Housing
Aluminum , Delta-Seal coated

MLV41-LL-RT/95/136 Related Documents