MLV41-LL-RT/92/136 Pepperl + Fuchs Electronic Components

Product Details

• Switching current
  max. 100 mA
• Housing height
  56.5 mm
• Adjustment range
  0 ... 120 mm on Kodak white, reflection factor 90%
• Ripple
  max. 10 %
• EAC conformity
  TR CU 020/2011
• Protection class
  II, rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 functional insulation acc. to DIN EN 50178
• Fiber optic adapter
  04
• Connection
  4-pin, M12 x 1 connector
• Mass
  50 g
• Mission Time (TM)
  20 a
• Switching voltage
  max. 30 V DC
• Response time
  0.5 ms
• Product standard
  EN 60947-5-2
• Storage temperature
  -40 ... 75 °C (-40 ... 167 °F)
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Operation indicator
  LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
• Function indicator
  LED yellow, lights up with receiver lit ; flashes when falling short of the stability control
• No-load supply current
  max. 40 mA
• MTTFd
  770 a
• Light type
  modulated visible red light , 660 nm
Switching frequency
1000 Hz
Voltage drop
≤ 2.5 V DC
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F)
Housing width
31 mm
Housing depth
13.6 mm
Housing
Aluminum , Delta-Seal coated
Connector
metal
Light source
LED
Control elements
Sensitivity adjuster, light/dark switch
Sensor range
on black (6 %): up to 36 mm, on Kodak white, reflection factor 90% up to 120 mm, with LLR 04-1.6-0.5-WC3 fiberoptic cable
Operating voltage
10 ... 30 V DC
Degree of protection
IP67
Reference target
100 mm x 100 mm on Kodak white, reflection factor 90%
Signal output
2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
UL approval
cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
Optical face
Fiber optic connection
Diagnostic Coverage (DC)
0 %
Switching type
light/dark on switchable, The switching modes specified in the "Electrical Connection" section apply to L/D switches in the "D" position (dark switch)

MLV41-LL-RT/92/136 Related Documents