MLV12-54-LAS/76B/110/115 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  MH82 reflector
• Pulse length
  1.8 µs
• Control elements
  rotary switch for light/dark, sensitivity adjuster
• Protection class
  II, rated voltage ≤ 300 V AC with pollution degree 1-2 according to IEC 60664-1
• Housing width
  41.5 mm
• Switching frequency
  2500 Hz
• Effective detection range
  0 ... 12 m
• Diagnostic Coverage (DC)
  90 %
• Test input
  emitter deactivation at 0 V
• Response time
  0.2 ms
• Product standard
  EN 60947-5-2
• Housing height
  49 mm
• Storage temperature
  -20 ... 65 °C (-4 ... 149 °F)
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  17.86 kHz
• Operation indicator
  LED green, flashes in case of short-circuit
• Voltage drop
  ≤ 2.5 V DC
• EAC conformity
  TR CU 020/2011
• Ambient temperature
  -10 ... 50 °C (14 ... 122 °F)
• Housing
  Frame: nickel plated, die cast zinc,, Laterals: glass-fiber reinforced plastic PC
Light type
modulated visible red light
Modulated light
5000 Lux
No-load supply current
max. 40 mA
Laser safety
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
CCC approval
CCC approval / marking not required for products rated ≤36 V
Mass
60 g
Reflector distance
0 ... 12 m
Light source
laser diode
max. pulse energy
6.7 nJ
Opening angle
0.02 °
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Switching type
light/dark on switchable
UL approval
cULus Listed, Type 1 enclosure
Vibration resistance
IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Connection
2500 mm fixed cable , PUR
Optical face
Plastic pane
Threshold detection range
17 m
Laser class
1
Beam divergence
< 1.5 mrad
Diameter of the light spot
approx. 5 mm x 12 mm at 15 m detection range
Mission Time (TM)
10 a
Operating voltage
10 ... 30 V DC
Ripple
max. 10 %
Polarization filter
yes
Wave length
650 nm
Continuous light
50000 Lux
MTTFd
930 a
Function indicator
2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Switching voltage
max. 30 V DC
Switching current
max. 0.1 A
Shock and impact resistance
IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Housing depth
15 mm
Degree of protection
IP67

MLV12-54-LAS/76B/110/115 Related Documents