BB10-P-F1-6118/35/59/103/115E Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 250 mm at a distance of 2 m
• MTTFd
  795 a
• Operating voltage
  10 ... 30 V DC
• Relative humidity
  90 % , noncondensing
• Optical face
  frontal
• No-load supply current
  Emitter: ≤ 20 mA, Receiver: ≤ 10 mA
• Mass
  approx. 25 g per device
• Opening angle
  Emitter: +/- 3 ° Receiver: +/- 10 ° at max. sensing range ; typical
• Function indicator
  LED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
• EAC conformity
  TR CU 020/2011
• Threshold detection range
  2.5 m
• Switching voltage
  max. 30 V DC
• Emitter
  BB10-T-F1-6118/115e
• Test input
  emitter deactivation at 0 V
• Switching frequency
  100 Hz
• Degree of protection
  IP67
• Receiver
  BB10-R-F1/35/59/103/115e
• Ambient light limit
  halogen light 100000 Lux ; according to EN 60947-5-2:2007
• Signal output
  1 PNP output, short-circuit protected, reverse polarity protected, open collector
• Response time
  5 ms
Light source
IRED
Mission Time (TM)
20 a
CCC approval
CCC approval / marking not required for products rated ≤36 V
Light type
modulated infrared light , 880 nm
Diagnostic Coverage (DC)
0 %
Voltage drop
≤ 1.5 V DC
Accessories provided
none
Switching current
max. 100 mA
Product standard
EN 60947-5-2
Effective detection range
0 ... 2 m
Switching type
dark-on
Connection
0.15 m cable with 3-pin JST connector Receiver: grey ; Emitter: black
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed, -20 ... 60 °C (-4 ... 140 °F) , movable
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC , black

BB10-P-F1-6118/35/59/103/115E Related Documents