MKDET1110P Panasonic Industrial Automation Components

Name: MKDET1110P
Brand: Panasonic
Price: 751 USD
Availability: BackOrder

Part#:MKDET1110P

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Panasonic MKDET1110P is an AC Servo Drive from the E series; K-frame, designed for high-speed position control, speed control, and high-functionality positioning control, including combined position/speed control. It operates with a single-phase input supply voltage of 100 V and supports a rated current of 10 A. This servo drive utilizes an IGBT PWM Sinusoidal wave drive control method and can connect to an external regenerative resistor while featuring a built-in dynamic brake. It is equipped with RS232 communication protocol for connectivity and operates in a pulse mode as per its interface specification. The MKDET1110P offers 7 digital inputs for control signal inputs and 2 for pulse signal inputs, alongside 4 digital outputs for control signal inputs and 4 for pulse signal outputs. It includes protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error. The device is designed to operate within an ambient air temperature range of 0-55 °C and features an LED indicating status for display.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of MKDET1110P on Applied Automation is $751.00. Order now.

Similar products from: Panasonic Industrial Automation Components

FX-501P

Panasonic

Panasonic FX-501P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501P offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. The device has one digital output (PNP open-collector / 24Vdc / 100mA) and offers response times varying from 25µs to 24ms depending on the mode. It features a 4-digit red LED display and a 3-digit green LED display for clear indication, with a power consumption of 0.96 W in normal mode and 0.68 W in Eco mode.

1 in stock

CX-411-P-J

Panasonic

Panasonic CX-411-P-J is a compact photoelectric thru-beam sensor emitter and receiver pair designed for detecting objects with a minimum size of 12mm. It is constructed with a PBT housing and an acrylic lens, ensuring durability within ambient air temperatures ranging from -25 to +55°C. This sensor offers a high degree of protection with an IP67 rating, making it suitable for various industrial environments. It operates with a red light of 680 nm wavelength and includes an orange LED for operation indication, a green LED for stability, and another green LED for power indication. The CX-411-P-J features a quick response time of 1ms / 0.001 s and provides a sensing distance of up to 10 meters. It is equipped with one digital output (PNP open-collector / 24Vdc / 100mA) and supports both Light-ON and Dark-ON operating modes. The sensor is pre-wired with a 3-pin M12 connector pigtail, facilitating easy installation and connection.

7 in stock

PM-T64P

Panasonic

T-TYPE U-SHAPED 5MM,5-24VDC,PNP,L-D/ON,B

12 in stock

AFP8670

Panasonic

FP PROGRAM LOADER

1 in stock

MUMS011A1A

Panasonic

SERVO MOTOR 100W

1 in stock

AFPX-BATT

Panasonic

Panasonic AFPX-BATT is a battery designed for use as a backup or spare battery, specifically intended to maintain the real-time clock in automation systems.

6 in stock

Manufacturer warranty

MKDET1110P Panasonic

$751.00

Your price can be lower.
Log in or Create account to check your discount

This part can be ordered

Select Qty:

$751.00

$751.00 each

This item may have a lead time. To ensure availability before placing your order, chat with our team—we'll confirm for you right away!

Fast Shipping & Delivery

We deliver nationwide and international

Secure Payment Processing

Your Safety, Our Priority.

Warranty

Manufacturer warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Applied Automation is an authorized Panasonic distributor, dedicated to bringing Panasonic's innovative industrial solutions to a broad range of customers. At Panasonic, the focus lies in advancing technology for better automation, providing an extensive lineup of industrial products that enhance operational efficiency and productivity. Their offerings include cutting-edge automation controls, adv...

Shop all Panasonic parts

Recently viewed products

PAXP0000

Red Lion

Red Lion PAXP0000 is a digital process meter from the PAX series, designed with 3 user inputs and a 1/8 DIN form factor measuring 96mm in width and 48mm in height (3.80" x 1.95"), featuring 14.2mm red digits and communication capability. It offers a degree of protection rated at IP65 NEMA 4X, suitable for various industrial environments. The meter operates on a supply voltage of 11-36Vdc, accommodating both 12Vdc and 24Vdc systems. It has a 20Hz analog input sampling rate, with one analog input supporting both 0-20mA and 0-10Vdc signals with 16-bits conversion. Additionally, it includes three digital inputs that can function as either Sink or Source (USER INPUT) and one analog output for retransmission purposes.

0 in stock

LD4006P0

Red Lion

Red Lion LD4006P0 is a dual digital counter/rate device from the LD series, featuring built-in batch counting capability. It supports RS-232 and RS-485 communication protocols, accommodating a wide range of supply voltages including 21.6-250Vdc and 50-250Vac. This counter is designed for surface mounting and offers a degree of protection rated at IP65 NEMA 4X. It is equipped with two digital inputs for high-speed counters (20kHz max.; Sink/Source) labeled INPUTS A / B, one digital input for Sink/Source functions labeled RESET / USER INPUT, and one digital output for indicating when a setpoint is reached.

0 in stock

PAXI0020

Red Lion

Red Lion PAXI0020 is a digital counter belonging to the PAX series, designed for dual functionality as either a digital counter or a counter+rate meter. It features a flush or door mounting mode within a 1/8 DIN (96x48mm) form factor, showcasing 14.2mm green digits for clear visibility. The device operates on a supply voltage range of 85-250Vac, accommodating various standard voltages such as 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. Its dimensions are specified as 1/8 DIN horizontal, measuring W96mm x H48mm (3.80" x 1.95"), and it is protected to a degree of IP65 NEMA 4X. For inputs, it includes 2 high-speed digital inputs capable of up to 34kHz (main inputs) and 3 digital inputs that can function as either Sink or Source (user input). Additionally, it provides 1 analog output for retransmission purposes.

0 in stock

4V21008BT

AirTAC

AirTAC 4V21008BT - Fld Ctrl Vlv 4V210-08-B, 4V200 Series, DC24V NPT

64 in stock

LA2-25-1755

Sprecher + Schuh

Sprecher + Schuh LA2-25-1755 - LA2 Base Mount Cam Switch, 25A, 5-Pole, ON-OFF 0-1 90 deg Left

0 in stock

EF303.3

Schmersal

EF303.3 Schmersal - Command and signalling devices; Contact and light terminal blocks (EF/EL); Screw connection; Mounting flange position 3; 51-52; 63-64 (Contact labelling); Suitable for EMERGENCY-OFF

0 in stock

PC-4M-BK

Clippard

22 mm Mushroom Captivated Push Button, Black (Red shown), Mount on panels or brackets up to 1/4" thick.

0 in stock

PAXP0000

Red Lion

0 in stock

LD4006P0

Red Lion

0 in stock

PAXI0020

Red Lion

0 in stock

PAXP0000

Red Lion

0 in stock

LD4006P0

Red Lion

0 in stock

PAXI0020

Red Lion

0 in stock

Relevant products

AFP0RC16CT

Verified stock: 1

Panasonic AFP0RC16CT is a CPU unit within the C16 sub-range, featuring an integrated Programmable Logic Controller (PLC) with transistor outputs. It offers memory backup and self-diagnostic functions. The unit connects via a MIL connector and a mini USB, and it is designed for DIN rail mounting. It supports the RS-232C communication protocol and can handle up to 112 x I/O points and 3 x expansion units. The memory capacity is 16K steps for programs and 12315words / 12Kwords for data, supporting up to 4096 x I/O points. It includes 8 x digital inputs (24Vdc; Sink / Source; with 6 x high-speed 50kHz counters), 8 x digital outputs (24Vdc; NPN; 200mA transistor; with 4 x 50kHz Pulse outputs / axes + 4 x 4.8kHz; 1000 resolution PWM channels), and 6 x analog inputs (RTD Pt100 / RTD Pt1000 / RTD Ni1000 / Resistance; with 0.1K/°F / 0.01K/°F resolution). Programming can be done in Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). It features an 8-character password setting for program upload protection. Processing times vary from 80ns/step for basic instructions up to 3000 steps, to 1620ns/step for high-level instructions after 3000 steps. Operating modes include periodical interrupt execution, interrupt program execution, constant scan execution, and program edition during RUN download in RUN mode.

Panasonic

MKDET1105P

Verified stock: 0

Panasonic MKDET1105P is an AC Servo Drive from the E series; K-frame, designed for high-speed position control, speed control, and high-functionality positioning control, including combined position/speed control. It operates with a single-phase input and utilizes an IGBT PWM Sinusoidal wave drive control method. This servo drive can connect to an external regenerative resistor and has a built-in dynamic brake. It supports a supply voltage of 100 V and operates within an ambient air temperature range of 0-55 °C. The rated current is 10 A, with a current detector rated at 5 A. Communication is facilitated through an RS232 protocol, and it operates in a pulse mode as per the interface specification. The MKDET1105P features 7 digital inputs for control signal inputs and 2 for pulse signal inputs, alongside 4 digital outputs for control signal inputs and 4 for pulse signal outputs. It is equipped with an LED indicating status for display and offers protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error.

Panasonic

MKDET1310P

Verified stock: 0

Panasonic MKDET1310P is an AC Servo Drive from the E series; K-frame, designed for high-speed position control, speed control, and high-functionality positioning control, including combined position/speed control. It operates with a three-phase input and supports a supply voltage of 200 V. The drive utilizes an IGBT PWM Sinusoidal wave drive control method, can connect to an external regenerative resistor, and has a built-in dynamic brake. It is equipped with RS232 communication protocol and operates in a pulse mode as per I/f specification. The MKDET1310P features 7 digital inputs for control signal inputs and 2 for pulse signal inputs, alongside 4 digital outputs for control signal inputs and 4 for pulse signal outputs. It offers protection functions against over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error. The device operates efficiently within an ambient air temperature range of 0-55 °C and has a rated current of 10 A. The status of the device can be monitored through an LED indicating display.

Panasonic

MKDET1505P

Verified stock: 0

Panasonic MKDET1505P is an AC Servo Drive from the E series; K-frame, designed for high-speed position control, speed control, and high-functionality positioning control, including combined position/speed control. It operates with a control method of IGBT PWM Sinusoidal wave drive and can connect to an external regenerative resistor, with a built-in dynamic brake. This servo drive supports a single or three-phase input with a supply voltage of 200 V and utilizes an RS232 communication protocol for connectivity. It is equipped with 7 x control signal inputs and 2 x pulse signal inputs for digital inputs, alongside 4 x control signal inputs and 4 x pulse signal outputs for digital outputs. The operating mode is defined by pulse (I/f specification), and it features an LED indicating status for display. The MKDET1505P operates efficiently within an ambient air temperature range of 0-55 °C and has a rated current of 10 A, with a current detector at 5 A. Protection functions include over-voltage, under-voltage, over-speed, overload, over-heat, over-current, and encoder error, ensuring the device's integrity during operation.

Panasonic