55144 Murr Elektronik I/O Systems

Product Details

• Weight
  589 g
• Series
  Field Bus System
• Type
  for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
• Temperature range
  -25...+55 °C (storage temperature -40...+85 °C)
• QC (Quick Connect)
  max. 360 ms
• Monitoring - under voltage
  yes
• Diagnostic via LED
  per module and channel
• Dimensions H×W×D
  39×63×225 mm
• Protection
  IP67
• Operating modes
  COM1; COM2; COM3 (automatic)
• PIN 4
  Input/Output (port X0...X7); IO-Link Master (port X4...X7)
• PIN 2
  Input/Output (port X0...X7); U-Actuator IO-Link Class B (port X4...X7)
• Product article number of manufacturer
  55144
• Actuator warning
  per channel via LED and BUS
• Communication status
  via LED
• Mounting method
  2-hole screw mounting, compatible with I/O modules of MVK model range
• Fieldbus
  Ethernet 10/100 Mbit/s; M12, D-coded
• Switching current per output
  max. 1.6 A (short-circuit and overload protected)
• Composite Test Revision
  CT14
• Cable break
  per IO-Link Master
Transfer parameters
32 Byte (In) 32 Byte (Out) per IO-Link port
DLR (Device Level Ring)
yes
Multiple connections
yes
Port Class
Class B (not galvanically separated)
Addressing
DHCP, BOOTP or IP address by DIP switch
Monitoring - no voltage
yes
IO-Link
4× Master
I/O ports
M12, 5-pole, A-coded
Diagnostic via BUS
per module and channel
Sensor supply US
24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected
Sensor-system/actuator supply
7/8", 4-pole, 2× max. 9 A
CIP Sync
yes
Lamp load
10 W
Actuator supply UA
24 V DC (EN 61131-2), max. 9 A

55144 Related Documents