54631 Murr Elektronik I/O Systems

Product Details

• Weight
  554 g
• Series
  Field Bus System
• Type
  for 3-wire sensors or mechanical switches, PNP, IO-Link Devices
• Operating modes
  COM1; COM2; COM3 (automatic)
• Product article number of manufacturer
  54631
• Dimensions H×W×D
  37×63×225 mm
• IO-Link
  8× Master
• Composite Test Revision
  16
• Actuator supply UA
  24 V DC (EN 61131-2), max. 10 A Port X0...X7
• Switching current per output
  max. 2 A per pin (short-circuit and overload-protected), max. 4 A per port
• Web interface
  yes
• Mounting method
  2-hole screw mounting, compatible with I/O modules of MVK model range
• Fieldbus
  Ethernet 10/100 Mbit/s; M12, D-coded
• Multiple connections
  yes
• Sensor supply US
  24 V DC (EN 61131-2), max. 2 A load per port, short-circuit and overload protected, total max. 10 A port X0...X7
• Port Class
  Class A + B (not galvanically separated)
• DLR (Device Level Ring)
  yes
• Actuator warning
  per channel via LED and BUS
• IIoT Interfaces
  yes (OPC UA, MQTT, JSON REST API)
• Sensor-system/actuator supply
  M12 Power, 5-pole, L-coded, 2× max. 16 A
Communication status
via LED
Monitoring - temperature
yes
PIN 2
Input/Output (port X0...X7); U-Actuator IO-Link Class B (port X0...X7)
Diagnostic via LED
per module and channel
Temperature range
-25...+70 °C (storage temperature -40...+80 °C)
Monitoring - energy
yes (current and voltage)
CIP Sync
yes
Monitoring - under voltage
yes
PIN 4
Input/output (port X0...X7); IO-Link master (port X0...X7)
Diagnostic via BUS
per module and channel
I/O ports
M12, 5-pole, A-coded
Monitoring - no voltage
yes
Protection
IP67
Transfer parameters
32 Byte (In) 32 Byte (Out) per IO-Link port
Addressing
DHCP, BOOTP or IP address by DIP switch
Cable break
per port

54631 Related Documents