27502 Murr Elektronik I/O Distributors

Product Details

• Weight
  4710 g
• Series
  Distribution Systems
• Current consumption
  max. 35 mA
• Inrush capacity
  max. 1470 µF
• Resistor (core)
  max. 57 Ω/km (0.34 mm²), max. 26 Ω/km (0.75 mm²); (20 °C)
• Material (wire isolation)
  TPE-E
• PIN 5
  (Earth)
• Protection
  IP65, IP67, IP68 inserted and tightened (EN 60529)
• Dimensions H×W×D
  145×55×21 mm
• Material (wire)
  Cu wire, bare
• Temperature range (mobile)
  -25...+80 °C
• Operating current (contact 3)
  max. 0.5 A (shutoff 0.7...0.9 A)
• No./diameter of wires
  16× 0.34 + 5× 0.75 mm²
• Approval (cable)
  UL (AWM-Style 20233/10042), CSA; CE conform
• Shore hardness (wire isolation)
  55 ±5 D
• Acceleration (C-track)
  max. 5 m/s²
• LED display
  LED (green): P1 and P2; LED (red): ERROR for optical diagnostics
• Total current
  max. 10 A
• AWG
  similar to AWG 22 (0.34 mm²); similar to AWG 18 (0.75 mm²)
• No. of bending cycles (C-track)
  max. 5 Mio. (25 °C)
Product article number of manufacturer
27502
Operating voltage
24 V DC (EN 61131-2), potential separation 0 V for left/right side
C-track properties
5 Mio.
Diameter (core)
16× 0.34 + 5× 0.75 mm²
Temperature range (fixed)
-40...+90 °C
Housing
Zinc die casting, matte nickel plated
Temperature range
-20...+60 °C
Jacket Color
gray
Bend radius (fixed)
5× outer Ø
PIN 4
(NO)/(S1)
Required power supply with max. ports
max. 10 A
Outer Ø
11.5 mm ±5%
Nominal voltage
300/500 V AC
Travel speed (C-track)
max. 2 m/s
Locking of ports
Screw thread (M12×1 mm)
Wire isolation
TPE (grpk, wh, rdbl, gn, whgn, ye, brgn, gr, whye, pk, yebr, rd, whgr, bk, grbr, vi, br, bl, gnye)
Shield
yes
Test voltage
2000 V AC
Bend radius (moving)
10× outer Ø
Functional description
All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-reseting). Supply voltage of other ports remains the same. In case of a fault the DIAGNOSTIC signal “active high”
LED display per port
LED (yellow): contact 4 and 2; 2× LED (red): for failure
Cable number
403
Shore hardness (jacket)
85 ±5 A
PIN 3
(-)
Diagnostic output
active high, max. load 25 mA, wire (brown 2)
Unit protection
pulse switching
Single wire Ø (core)
0.1 mm
Current load capacity
to DIN VDE 0298-4
PIN 1
(+)
Material (jacket)
PUR (UL/CSA)
PIN 2
(NC)/(S2)

27502 Related Documents